AP-630 Designing for On-Board Programming Using the IEEE 1149.1 (JTAG) Access Port
This document provides information on an alternative OBP method for small form factor PCB applications. You will learn about using the Joint Test Action Group Test Access Port (JTAG TAP) to perform OBP. This application note provides details about the following topics:
What is JTAG?
Why use the JTAG TAP to program flash memory?
JTAG programming performance
Design considerations
Programming strategies
Vendor references
- File Name/Size:
- 29218602.pdf
116816 bytes
- Download From:
- Developers' Insight CD-ROM
* Legal Information © 1998 Intel Corporation